DigiPlus stock

Carbon cleaning in the engine cylinder (clean the inside of the engine,DigiPlus stock remove the carbon!) With the increase of the use time of the car, it is inevitable that there will be carbon accumulation problems inside the engine, which will affect the vehicle and reduce the performance of the vehicle. Therefore, it becomes very important to regularly clean the carbon in the engine cylinder. This article will discuss the principle and necessity of cleaning the carbon in the engine cylinder, and how to clean the carbon in the engine cylinder. The principle and necessity of carbon accumulation in the engine cylinder. Carbon accumulation in the engine cylinder is caused by partial combustion or incomplete combustion of combustible substances.There is high temperature and pressure in the combustion chamber, so that the unburned oil, gas and pollutants will form a film on the cylinder wall and piston ring. Over time, this film will form hard carbide, which affects the performance of the cylinder, making the fuel injection unstable, resulting in increased fuel consumption and insensitive accelerator response. In addition, the problem of carbon accumulation will also lead to problems such as engine start-up difficulties and loss of power. If it is not solved, it will even lead to more serious damage to the cylinder wall. It can be seen that it is very necessary to clean the carbon in the engine cylinder, which can effectively solve these problems and improve vehicle performance and driving safety. The method of carbon cleaning in the engine cylinder There are many ways to clean the carbon in the engine cylinder. The traditional method is to add some detergent when refueling. In this way, the detergent will circulate the lubricating oil line system inside the engine, remove the carbon and burn slowly.Then you need to use a high-pressure oil pump to send the cleaner to the cylinder wall, piston, piston ring and valve seat and other areas. This method can automatically clean the inside of the engine when refueling. Another common method is to send the detergent into the engine directly through the intake duct. This method requires professional tools and skills. First, you need to clean up the device, prepare the tools and determine the reference location and APP parameters. The cleaning effect may be better, but the cleaning cost may be higher. This method requires some professional knowledge and is not suitable for self-operation at home. It is not excluded that car owners often change the oil to maintain the engine, because the detergent has always been mixed into the oil. Therefore, regular oil replacement is one of the most basic methods for cleaning carbon in the engine cylinder for car owners. In short, how to clean the carbon in the engine cylinder depends on the owner's time and financial budget, as well as the degree of protection of the vehicle.But regardless of the method, car owners should carry out this necessary maintenance work from time to time. Precautions for cleaning carbon accumulation in the engine cylinder. When cleaning the engine, the following points need to be paid attention to: 1. The choice of detergent. It is recommended to use high-quality detergents to avoid damage to the engine. Two. Cleaning time. After cleaning, parts such as cylinder walls and pistons need appropriate time to recover. 3. Cleaning frequency. Car owners need to clean the vehicle regularly (usually every 10,000-20,000 kilometers) to avoid serious carbon problems. Four. Operation method. The operation process must be very careful to avoid damage to the engine. Conclusion Carbon cleaning in engine cylinders is a very important part of car maintenance and must be paid attention to. Choosing the right detergent and method can effectively remove carbon accumulation, thus improving the performance and safety of the car.If you have any questions, please consult your car maintenance professional for guidance.

Contact Us
Phone：020-83484633